4. PREPARE THE BLOWER HOUSING
Detach the blower housing from the hood by removing its both retaining screws (A). Keep the screws for further use.
Fold up its both flanges (B). The flanges must be perpendicular to the top of the blower housing.
A |
B |
B |
HD0229 |
5. REMOVE THE FILTERS AND THE GREASE DRIP RAIL
A.Remove tape on filters. Remove filters from hood and set aside.
NOTE: It is recommended to start with the central one.
B.Remove tape on grease drip rail (1). Lift out grease drip rail and set aside.
1 |
HD0222 |
6. REMOVE THE PAN |
|
|
NOTE: Do not remove the 4 screws located on the |
| |
notched parts of the pan (A on figure below). |
|
|
A | Using a Phillips no. 2, remove 8 screws |
|
| retaining the pan (shaded part on | RETAINING SCREWS LOCATION |
| illustration beside) to the hood. | |
|
| HD0224 |
| Remove the pan and set aside. |
|
A |
|
|
HD0223 |
|
|
|
| HD0238 |
- 7 -
