FlipScreen Owner’s Manual

Setting Up Your iCEBOX

Installing the Batteries

Before you turn on your iCEBOX, you will need to install the batteries in the remote and keyboard and set up the connections to support the many fea- tures of the iCEBOX. These connections may include:

Your television cable or antenna

Any additional video sources (such as a camera and/or satellite cable)

The included FM Radio antenna

A PCMCIA Network card and an Ethernet cable or phone line.

A SANI network card if you have other Beyond Appliances

The final thing you should do is plug in the power cord before turning on the device. Figure 5 shows the rear panel connections on the iCEBOX.

The remote requires two AAA batteries (supplied), and the keyboard requires two AA batteries (supplied). Alkaline batteries are recommended.

To install the batteries for your remote

1.On the back of the remote, remove the battery cover by loosening the small screw in the center of the panel ( fig. 3). Keep the attached washer with the screw.

2.Install two AAA batteries, ensuring that the polarity (+ and –) on the batteries matches the + and – markings in the battery compartment.

3.Reattach the battery cover, making sure that the cover is seated properly.

4.Insert the screw, with the washer still attached, and tighten the screw until it is snug.

!

Caution:

Do not overtighten the screw. You may damage the

 

 

 

washer and the remote will no longer be washable.

 

 

 

6

Page 12
Image 12
Beyond Icebox Flipscreen manual Setting Up Your iCEBOX, To install the batteries for your remote