Configuring PC in Windows NT4.0 | Billion Electric Company 7100SV

Chapter 3 Configuration

Configuring PC in Windows NT4.0

1.Go to Start / Settings / Control Panel. In the Control Panel, double- click on Network and choose the Protocols tab.

2.Select TCP/IP Protocol and click Properties.

13

Image 17

Billion Electric Company 7100SV manual Configuring PC in Windows NT4.0

Contents

Bipac 7100SV Page Chapter Appendix An Overview of Bipac 7100SV Chapter Introduction Bipac 7100SV Features Package Contents Introduction Bipac 7100SV Application Lit green when the LAN link is connected Lit green when power adapter is connectedFront LEDs Meaning Cabling Rear Ports Configuring PC in Windows XP Before Configuration Billion Bipac 7100SV VoIP Adsl Router Configuration Configuring PC in Windows Billion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings LAN Port WAN Port IP address Information from ISPDhcp server function IP addresses for Configuring with Web Browser Quick Start Status Status Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status LAN Status TCP Status Status- PPP Status Routing Table Status- Learned MAC Table System Log Adsl Quick Start Security Logs VoIP Quick Start Select Adapter 3.1 WAN Configuration MAC Spoofing Service Category Select UBR or CBR Dhcp ClientStatic IP Settings Device IP Address 3.2 LAN VoIP AuthorizationUserID Same as UserID Configuration Service Provider Phone Book Dial Plan Call Feature CallForwarding 3.3.6 PTM Ring Tone Configuration Timer System Password Time Zone Upgrade Restart Factory Setting Packet Filtering Firewall Billion Bipac 7100SV VoIP Adsl Router Bridge Filtering Intrusion Detection Block WAN Request Virtual Server Adsl Advanced 3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Static Route Misc Configuration PPP Half Bridge Default at Disabled Diagnostic TestTesting Ethernet LAN connection Testing Adsl Synchronization Test ATM OAM End-to-End Loop Back Test ATM OAM Segment Loop BackTest Ethernet connect to ATM Test IP connect to PPP Configuration Save Config Problems with the WAN Interface Corrective Action Problems Starting Up the Adsl Router Corrective ActionProblems with the LAN Interface Corrective Action Problems Connecting to a Remote Node or ISP Contact Billion Appendix