Billion Electric Company 7100SV manual

Chapter 3 Configuration

5.Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.

6.Click OK to finish the configuration.

Configuring PC in Windows 95/98/ME

1.Go to Start / Settings / Control Panel. In the Control Panel, double- click on Network and choose the Configuration tab.

2.Select TCP / IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC.

3.Click Properties.

11

Image 15

Billion Electric Company 7100SV manual Configuring PC in Windows 95/98/ME

Contents

Bipac 7100SV Page Chapter Appendix An Overview of Bipac 7100SV Chapter Introduction Bipac 7100SV Features Package Contents Introduction Bipac 7100SV Application Meaning Lit green when power adapter is connectedLit green when the LAN link is connected Front LEDs Cabling Rear Ports Configuring PC in Windows XP Before Configuration Billion Bipac 7100SV VoIP Adsl Router Configuration Configuring PC in Windows Billion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings IP addresses for Information from ISPLAN Port WAN Port IP address Dhcp server function Configuring with Web Browser Quick Start Status Status Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status LAN Status TCP Status Status- PPP Status Routing Table Status- Learned MAC Table System Log Adsl Quick Start Security Logs VoIP Quick Start Select Adapter 3.1 WAN Configuration Service Category Select UBR or CBR Dhcp Client Static IP SettingsMAC Spoofing Device IP Address 3.2 LAN VoIP AuthorizationUserID Same as UserID Configuration Service Provider Phone Book Dial Plan Call Feature CallForwarding 3.3.6 PTM Ring Tone Configuration Timer System Password Time Zone Upgrade Restart Factory Setting Packet Filtering Firewall Billion Bipac 7100SV VoIP Adsl Router Bridge Filtering Intrusion Detection Block WAN Request Virtual Server Adsl Advanced 3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Static Route Misc Configuration Testing Adsl Synchronization Diagnostic TestPPP Half Bridge Default at Disabled Testing Ethernet LAN connection Test IP connect to PPP Test ATM OAM Segment Loop BackTest ATM OAM End-to-End Loop Back Test Ethernet connect to ATM Configuration Save Config Problems Connecting to a Remote Node or ISP Problems Starting Up the Adsl Router Corrective ActionProblems with the WAN Interface Corrective Action Problems with the LAN Interface Corrective Action Contact Billion Appendix