3.7.5 RIP | Billion Electric Company 7100SV specs

Billion BIPAC 7100SV VoIP ADSL Router

3.4.3.7.5 RIP

RIP: Default is Disabled.

Border Gateway: Default is Enabled.

Supply Interval	seconds: The default value is 30 seconds.
Expire Timeout	seconds: The default value is 180 seconds.
Garbage Timeout	seconds: The default value is 120 seconds.

54

Image 58

Billion Electric Company 7100SV manual 3.7.5 RIP

Contents

Bipac 7100SV Page Chapter Appendix Chapter Introduction An Overview of Bipac 7100SV Package Contents Bipac 7100SV Features Introduction Bipac 7100SV Application Front LEDs Lit green when power adapter is connectedLit green when the LAN link is connected Meaning Rear Ports Cabling Before Configuration Configuring PC in Windows XP Billion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows Configuration Billion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Dhcp server function Information from ISPLAN Port WAN Port IP address IP addresses for Configuring with Web Browser Status Quick Start Status Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status Status- PPP Status LAN Status TCP Status Status- Learned MAC Table Routing Table System Log Security Logs Adsl Quick Start VoIP Quick Start 3.1 WAN Select Adapter Configuration Static IP Settings Service Category Select UBR or CBR Dhcp ClientMAC Spoofing 3.2 LAN Device IP Address VoIP Configuration AuthorizationUserID Same as UserID Service Provider Phone Book Dial Plan Call Feature CallForwarding 3.3.6 PTM Ring Tone Configuration Timer Password System Time Zone Upgrade Factory Setting Restart Firewall Packet Filtering Billion Bipac 7100SV VoIP Adsl Router Bridge Filtering Intrusion Detection Block WAN Request Virtual Server Advanced Adsl 3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Static Route Misc Configuration Testing Ethernet LAN connection Diagnostic TestPPP Half Bridge Default at Disabled Testing Adsl Synchronization Test Ethernet connect to ATM Test ATM OAM Segment Loop BackTest ATM OAM End-to-End Loop Back Test IP connect to PPP Configuration Save Config Problems with the LAN Interface Corrective Action Problems Starting Up the Adsl Router Corrective ActionProblems with the WAN Interface Corrective Action Problems Connecting to a Remote Node or ISP Appendix Contact Billion