Service Provider | Billion Electric Company 7100SV instruction

Billion BIPAC 7100SV VoIP ADSL Router

G.729A: Set the priority of voice compression to be used in the voice codec.

Please be noted. Then codec priority is selected using a drop-down box. If two codec type are assigned the same priority, then the priority is assigned in the order as G.711U > G.711A > G.729A in the decreasing order or priority. For example if the user selects 1, 2, 2 for G.711U, G.711A, and G.729A respectively, the application will assign priority as 1, 2, 3 for G.711U, G.711A and G.729A respectively.

3.4.3.3.2 Service Provider

This screen contains settings for register to get VoIP service from SIP service provider.

Registration Interval: specify the re-registration interval in seconds.

Authentication Method: specify the authentication method, currently MD5 is supported only.

Registrar Address: indicate the SIP registrar IP address

RegistrarPort: specify the port of the SIP registrar on which it will listen for register requests from VoIP device.

ProxyAddress: indicate the SIP proxy server IP address.

ProxyPort: specify the port of the SIP proxy server on which it will listen for messages.

OutbondProxyAddress: indicate the SIP outbound proxy server IP address. This parameter is very useful when VoIP device is behind a NAT.

32

Image 36

Billion Electric Company 7100SV manual Service Provider

Contents

Bipac 7100SV Page Chapter Appendix Chapter Introduction An Overview of Bipac 7100SV Package Contents Bipac 7100SV Features Introduction Bipac 7100SV Application Lit green when power adapter is connected Lit green when the LAN link is connectedFront LEDs Meaning Rear Ports Cabling Before Configuration Configuring PC in Windows XP Billion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows Configuration Billion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Information from ISP LAN Port WAN Port IP addressDhcp server function IP addresses for Configuring with Web Browser Status Quick Start Status Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status Status- PPP Status LAN Status TCP Status Status- Learned MAC Table Routing Table System Log Security Logs Adsl Quick Start VoIP Quick Start 3.1 WAN Select Adapter Configuration Service Category Select UBR or CBR Dhcp Client Static IP SettingsMAC Spoofing 3.2 LAN Device IP Address VoIP Configuration AuthorizationUserID Same as UserID Service Provider Phone Book Dial Plan Call Feature CallForwarding 3.3.6 PTM Ring Tone Configuration Timer Password System Time Zone Upgrade Factory Setting Restart Firewall Packet Filtering Billion Bipac 7100SV VoIP Adsl Router Bridge Filtering Intrusion Detection Block WAN Request Virtual Server Advanced Adsl 3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Static Route Misc Configuration Diagnostic Test PPP Half Bridge Default at DisabledTesting Ethernet LAN connection Testing Adsl Synchronization Test ATM OAM Segment Loop Back Test ATM OAM End-to-End Loop BackTest Ethernet connect to ATM Test IP connect to PPP Configuration Save Config Problems Starting Up the Adsl Router Corrective Action Problems with the WAN Interface Corrective ActionProblems with the LAN Interface Corrective Action Problems Connecting to a Remote Node or ISP Appendix Contact Billion