
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
You can setup member ports for each VLAN group under Bridge Interface section. From the example, two VLAN groups need to be created.
Ethernet: P1 and P2 (Port 1, 2).
Ethernet1: P3, P4 and Wireless (Port 3, 4, Wireless). Uncheck P3, P4 and Wireless from Ethernet VLAN port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in this order.
Bridge Interface | VLAN Port (Always starts with) | |||
ethernet | P1 | / P2 | / P3 | / P4 / Wireless |
ethernet1 | P2 | / P3 | / P4 | / Wireless |
ethernet2 | P3 | / P4 | / Wireless | |
ethernet3 | P4 | / Wireless | ||
ethernet4 | Wireless |
|
Management Interface: To specify which VLAN group has possibility to do device management, like doing web management.
Note: NAT/NAPT can be applied to management interface only
Ethernet
Primary IP Address
IP Address: The default IP on this router.
Subnet Mask: The default subnet mask on this router.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
30
Chapter 4: Configuration