Operation

When you are finished

1.Turn off the heater, wet clean, and power buttons.

2.Remove the collection tank from the unit by opening the quick release hose holder and lifting the tank straight up by the handle.

3.Remove the top lid from the collection tank and set it aside.

4.Empty dirty water into a sink, toilet or outside. Pour the dirty water out from the corner of the tank. Rinse out the tank thoroughly.

NOTE: You may leave the solution tank with water and formula in it so you are ready for the next use.

5.Allow all parts to dry before storing.

Hard floor cleaning

1.See “Getting Ready to Wet Clean” on Page 10.

2.Be sure to use BISSELL Hard Floor Solutions in the solution tank for hard floor cleaning. Fill the formula tank by first unscrewing the measuring cap. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. Fill tank to fill line with hot tap water. Add one full cap of formula. Screw measuring cap tightly back onto the solution tank.

3.Set the solution tank back in the machine.

4.Attach microfiber pad to quick dry hard floor tool by attaching to the Velcro strips on the top of the tool.

5.Attach the hard floor tool to end of the wand.

6.Place tool directly on the hard floor surface, resting on the pad.

7.Squeeze the spray trigger to moisten the pad with cleaning solution.

Caution: Do not oversaturate.

8.Move the tool back and forth across the floor to clean. Squeeze spray trigger as needed.

9.Tilt the tool forward and pull back. This will create the best suction and will help get the hard floor surface as dry as possible.

10.Continue until room is complete.

11.See“When you are finished”instructions above.

12.Be sure to remove the microfiber pad and clean it by hand or machine wash as needed. Allow it to dry completely before next use.

23

4

CAUTION:

Your Big Green complete is designed to clean hard floor- ing such as ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Do not use on any unsealed hard floor surfaces.

4

126

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

ug120-4004_7700_807.indd 12

10/30/07 3:40:05 PM

Page 12
Image 12
Bissell 7700 warranty When you are finished, Allow all parts to dry before storing, Hard floor cleaning