Bissell 8910 Choose The SmartMix Setting, Set Ready Tools Dial, Power Switch, Cleaning strokes

Choose The SmartMix Setting

Simply choose one of the 3 settings

•High Traffic

•Normal

•Water Rinse/Carpet Protector

and the ProHeat will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need.

NOTE: When your cleaning job is finished, the formula can be stored ready to use in your machine for the next time!

WARNING:

To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.

When filling bottle or storing unit, set

dial to:

Set Ready Tools Dial

Set Ready Tools Dial to the Floor Cleaning Setting.

Power Switch

1.Plug into a proper outlet and turn the Power and Heater switches to the ON ( I ) position. The switches are found on the back of the handle. Allow 1 minute for the built-in heater to warm-up before cleaning. The ProHeat will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning.

2.The SmartTemp ready light indicates when the heater is ON ( I ).

Note: SmartTemp heats the cleaning solution for carpet and bare floor application only. It does not heat solution sprayed through the accessory tools.

Cleaning strokes

1.While pressing the Trigger, make one slow forward wet pass and another one back. Let the Built-In Heater, formula, and DirtLifter PowerBrush do the work for you. Caution: Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.

2.Release the Trigger and make one slow forward and backward pass over the same area to remove any residual dirty water, and aid in drying. Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you can’t see any more water being pulled up.

NOTE: Both the SmartMix tank and the clean water tank must have liquid in them in order for the machine to spray. If one tank is empty the machine will not apply cleaning solution or water.

3.After cleaning, you may want to turn the SmartMix dial to Rinse to give your carpeting a final water only rinse. This will ensure thorough removal of embedded dirt loosened by the deep cleaning formula. BISSELL deep cleaning formulas contain an anti-resoiling agent that helps your carpets repel dirt and keeps them looking good longer.

10 w w w . b i s s e l l . c o m

SmartMix Dial

TRAFFIC		RINSE
HIGH
	NORMAL
	WATER
	CARPETROTECT

ReadyTools Dial

Tip:

Deep Cleaning stairs and high traffic areas on a regular basis can prolong carpet life.

1	Power Switch
	SmartTemp Switch
	ON
	OFF

SmartTemp Light

2

WARNING:

To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.

8 0 0 . 2 3 7 . 7 6 9 1

ug310-5868_1699_306.indd 10 3/1/06 3:13:50 PM