Troubleshooting / User Maintenance (Continued)
Cleaner not picking up solution.
Possible Causes
1.Ready Tools dial may be on the wrong setting for the cleaning job.
2.Nozzle Window may not be properly attached.1.Set ReadyTools dial to either or Tools/PreTreat Floor Cleaning.
2.Press down firmly on the black oval gasket at the top window to make sure the two tabs on the back of the Nozzle Window are snapped into the mating slots in the main housing.
4.
(Hand held attachments only).
6.5.Adjust angle; apply more downward pressure.
6.EmptyOther Maintenance or Service not included above should be performed by an
authorized service representative.Thank you for selecting a BISSELL product.
If you should happen to need assistance during assembly or operations, call
Please do not return this product to the store
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer ServicesMonday - Friday | 8 a.m. — 10 p.m. EST |
Saturday | 9 a.m. — 8 p.m. EST |
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer ServicesOr visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See "About Your Warranty" on page 20 for details.
8 0 0 . 2 3 7 . 7 6 9 1
3/1/06 3:14:04 PM |