Transporting batteriescan possibly cause fires if the battery terminals inadvertently

come in contact with conductivematerials such as keys, coins, hand tools and the

like. The US Department of TransportationHazardous Material Regulations (HMR)

actually prohibit transporting batteries in commerce or on airplanes (i.e., packed in

suitcases and carry-on luggage) UNLESS they are properly protected from short circuits.

So when transporting individual batteries, make sure that the battery terminals are

protected and well insulated from materials that could contact them and cause a short

circuit. NOTE: Lithium-Ionbatteries should not be put in checked baggage.

STORAGE RECOMMENDATIONS

 

 

 

1. The best storage place is one that is cool and dry away from direct sunlight and

excess heat or cold.

 

 

 

2. Long storage will not harm the battery pack or charger.

 

CHARGING PROCEDURE

 

 

 

Black & Decker chargers are designed to charge

 

Black & Decker battery packs in 5-8 hours depending on the pack being charged.

1. Plug the charger into an appropriate outlet before inserting the battery pack.

2. Insert the battery pack into the charger as shown in

 

 

figure A.

 

 

A

 

 

 

3. The green LED will flash indicating that the

 

 

 

 

 

 

 

 

 

battery is being charged.

 

 

 

 

 

 

 

 

 

 

 

4. The completion of charge is indicated by the

 

 

 

 

 

green LED remaining on continuously. The pack

 

 

 

 

 

 

 

 

 

 

is fully charged and may be used at this time or

 

 

 

 

 

left on the charger.

 

 

 

Recharge discharged batteries as soon as possible

 

 

after use or battery life may be greatly diminished.

 

 

For longest battery life, do not discharge batteries

 

 

fully. It is recommended that the batteries be recharged

 

 

after each use.

 

 

 

 

 

 

CHARGER DIAGNOSTICS

 

 

 

This charger is designed to detect certain problems that can arise with the battery packs

or the power source. Problems are indicated by one LED flashing in different patterns.

BAD BATTERY

 

 

 

 

 

 

The charger can detect a weak or damaged battery. The red LED flashes in the

 

 

 

pattern indicated on the label. If you see this bad battery blink pattern, do not

 

 

 

continue to charge the battery. Return it to a service center or a collection site for

 

 

 

recycling.

 

 

 

HOT/COLD PACK DELAY

 

 

 

 

 

 

When the charger detects a battery that is excessively hot or excessively cold, it

 

 

 

automatically starts a Hot/Cold Pack Delay, suspending charging until the battery

 

 

 

has normalized. After this happens, the charger automatically switches to the Pack

 

 

 

Charging mode. This feature ensures maximum battery life. The red LED flashes

 

 

 

in the pattern indicated on the label.

 

 

 

LEAVING THE BATTERY IN THE CHARGER

 

The charger and battery pack can be left connected with the green LED glowing

indefinitely. The charger will keep the battery pack fresh and fully charged.

IMPORTANT CHARGING NOTES

 

 

 

1. Longest life and best performance can be obtained if the battery pack is charged when

the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery

pack in an air temperature below +40°F (+4.5°C), or above +105°F (+40.5°C). This is

important and will prevent serious damage to the battery pack.

2. The charger and battery pack may become warm to touch while charging. This is a

normal condition, and does not indicate a problem. To facilitate the cooling of the battery

pack after use, avoid placing the charger or battery pack in a warm environment such as

in a metal shed, or an uninsulated trailer.

 

 

 

3. If the battery pack does not charge properly:

 

 

a. Check current at receptacle by plugging in a lamp or other appliance

 

b. Check to see if receptacle is connected to a light switch which turns power off

 

when you turn out the lights.

7

 

 

 

 

 

 

 

 

Page 51
Image 51
Black & Decker BDCD220IA-1 instruction manual Recycling, Pattern indicated on the label

BDCD220IA-1, BDCD220IA specifications

The Black & Decker BDCD220IA and BDCD220IA-1 are versatile and powerful cordless drill/driver tools that cater to both DIY enthusiasts and professionals alike. Designed for maximum efficiency and ease of use, these models stand out with a variety of features and technologies that make them a reliable choice for various drilling and fastening tasks.

One of the key features of the BDCD220IA series is its lightweight design, making it easy to handle and operate for extended periods without causing undue strain on the user. This is particularly beneficial when working in tight spaces or overhead applications. Weighing in at just under 3.5 pounds, it allows for increased maneuverability and comfort during prolonged use.

The BDCD220IA is equipped with a robust 20V MAX lithium-ion battery that provides extended runtime and less downtime between charges. This innovative battery technology ensures that the drill delivers consistent performance, allowing users to tackle a range of projects with confidence. The package includes a smart charger that prepares the battery for use in a short amount of time, making it perfect for busy individuals.

Another notable characteristic of this drill/driver is its high-performance, variable-speed motor. With a maximum speed of up to 650 RPM, it allows for precision drilling in various materials, including wood, metal, and plastic. The two-speed transmission further enhances versatility, enabling users to select the appropriate speed for the task at hand, whether it’s a delicate job or heavy-duty drilling.

The ergonomic grip design ensures comfort and control, minimizing user fatigue. Additionally, the BDCD220IA features a built-in LED work light that illuminates dark work areas, providing users with improved visibility and precision in low-light conditions.

Furthermore, the tool is designed with a keyless chuck that makes changing drill bits and accessories quick and easy, fostering efficiency while working on different projects. Its compact size and design mean it can be conveniently stored and transported, making it an ideal tool for both home and professional use.

In summary, the Black & Decker BDCD220IA and BDCD220IA-1 are exceptional cordless drill/drivers featuring powerful performance, innovative battery technology, and user-friendly designs. These tools are perfect for a variety of tasks, ensuring that users have the capabilities they need to bring their projects to life. Whether tackling a home improvement goal or a professional task, these drill/drivers are reliable companions for any user.