7
FUNCTIONAL DESCRIPTION

NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE

CURRENT PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS CONTAINED

IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE

ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO

ILLUSTRATE TECHNIQUE ONLY.

FOREWORD

Model BDTS200 is a 10 inch Table Saw designed to give high quality performance with depth of cut capacity up to 3
inches (76mm) at 90° and 2 inches (51mm) at 45° for clean cutting of standard stock sizes.

EXTENSION CORDS

WARNING: Use proper extension cords. Make sure
your extension cord is in good condition and is a 3-wire
extension cord which has a 3-prong grounding type
plug and matching receptacle which will accept the
machine’s plug. When using an extension cord, be
sure to use one heavy enough to carry the current of
the machine. An undersized cord will cause a drop in
line voltage, resulting in loss of power and
overheating. Fig. C shows the correct gauge to use
depending on the cord length. If in doubt, use the next
heavier gauge. The smaller the gauge number, the
heavier the cord.
Fig. C
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere Total Length Gauge of
Rating Volts of Cord in Feet Extension Cord
0-6 120
up to
25 18 AWG
0-6 120 25-50 16 AWG
0-6 120 50-100 16 AWG
0-6 120 100-150 14 AWG
6-10 120
up to
25 18 AWG
6-10 120 25-50 16 AWG
6-10 120 50-100 14 AWG
6-10 120 100-150 12 AWG
10-12 120
up to
25 16 AWG
10-12 120 25-50 16 AWG
10-12 120 50-100 14 AWG
10-12 120 100-150 12 AWG
12-16 120
up to
25 14 AWG
12-16 120 25-50 12 AWG
12-16 120 GREATER THAN 50 FEET NOT RECOMMENDED

MOTORIZED BENCH SAW PARTS

Fig. 1 illustrates the saw removed from the container.
Figs. 2 and Fig. 3 illustrate the loose items packed with
the saw. Fig. 4 illustrates the loose items packed for the
stand.
Fig. 1
CARTON CONTENTS