Black & Decker CM1836R, CM 1836 Operation, Charging Procedure- Figures F & G, Know Your Mower

CHARGING PROCEDURE- FIGURES F & G

1. Remove safety key F-1.

2. Align the charger plug F-2with the arrow F-4on top and insert the charger plug into the receptacle F-3on the mower (green terminal to green terminal, white terminal to white terminal). The charger connector can only be plugged into the mower receptacle one way.

3. Insert the 120 volt plug G-3of the charger G-1into the wall receptacle.

4. The red light G-2on the charger should come on indicating you have power and the battery is being charged. Check the charger for the red light, if it is not on check the charger connector for proper alignment (step 2). The red light should extinguish and the green light will come on when charging is complete (takes approximately 12 - 20 hours to charge a fully discharged mower).

5. It is recommended to leave the battery on constant charge (between mowing uses) for optimum performance during the mowing season.

6. The charger supplied with this product is intended to be plugged in such that it is correctly orientated in a vertical or floor mount position.

OPERATION

KNOW YOUR MOWER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR MOWER. See “Functional Description” - to familiarizeSAFETYyourselfKEY with the location of various controls and adjustments. Save this manual for future reference.

DANGER : SHARP MOVING BLADE.

In order to prevent accidental start-up or unauthorized use of your Cordless Mower, a removable Safety Key has been incorporated into the design of your mower. The mower will be completely disabled when the Safety Key has been removed from the mower. With the Safety Key removed, you will have access to the charger receptacle.

NOTE: THE SAFETY KEY HAS A SLOT TO ALLOW FOR STORAGE ON A NAIL, OUT OF THE REACH OF CHILDREN. DO NOT TETHER SAFETY KEY TO MOWER.

DANGER: ROTATING BLADES CAN CAUSE SERIOUS INJURY. TO PREVENT SERIOUS INJURY, REMOVE SAFETY KEY WHEN UNATTENDED, OR WHEN CHARGING, CLEANING, SERVICING, TRANSPORTING, LIFTING, OR STORING MOWER.

TO TURN MOWER ON

Insert safety key F-1into the switch housing, until it is fully se ated inside housing. The mower is now operational and can be started by activating the switch lever H-2.

DANGER: SHARP MOVING BLADE. NEVER ATTEMPT TO OVERRIDE THE OPERATION OF THIS SWITCH AND SAFETY KEY SYSTEM AS SERIOUS INJURY COULD RESULT.

9