KNOW YOUR TILLER

OPERATING INSTRUCTIONS

 

 

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER. See “Func-

tional Description” to familiarize yourself with the location of various controls and adjustments. Save this manual for

future reference.

 

 

SAFETY KEY

 

 

DANGER: SHARP MOVING TINES. In order to prevent accidental start-up or unauthorized use of your

Cordless Tiller, a removable safety key I-1has been incorporated into the design of your tiller. The tiller will be

completely disabled when the Safety Key has been removed. With the Safety Key removed, you will have access to the

charger receptacle I-3.

 

 

NOTE: THE SAFETY KEY HAS A HOLE IN THE CENTER TO ALLOW FOR STORAGE ON A NAIL, OUT OF THE

REACH OF CHILDREN. DO NOT TETHER SAFETY KEY TO TILLER.

 

DANGER: ROTATING TINES CAN CAUSE SERIOUS INJURY. TO PREVENT SERIOUS INJURY,REMOVE

SAFETY KEY WHEN UNATTENDED, OR WHEN CHARGING, CLEANING, SERVICING, TRANSPORTING,

LIFTING, OR STORING TILLER.

 

 

TO TURN TILLER ON

 

L

Insert safety key L-1into the switch housing, until it is fully seated inside

 

housing. The tiller is now operational.

 

 

DANGER: SHARP MOVING BLADE. NEVER ATTEMPT TO

 

OVERRIDE THE OPERATION OF THIS SWITCH/BAIL HANDLE AND

 

SAFETY KEY SYSTEM AS SERIOUS INJURY COULD RESULT.

 

ON-OFF SWITCH (BAIL HANDLE) - FIGURE M

 

Your tiller is equipped with a special on-off switch system. To operate the system:

1. Make sure safety key is inserted as described above.

M

2. Push button M-1on side of switch housing.

Note: Starting the tiller motor also starts the tilling action.

 

3. Stand behind the tiller and pivot the tiller slightly toward the rear, so

 

that its weight is resting on its wheels and the tines are not in contact

 

with the ground.

 

 

4. To operate the switch, pull the bail handle (switch lever) M-2to the

 

handlebar M-3and hold it against the tiller handle to keep it running.

 

5. To turn the tiller off, release the bail handle.

 

DANGER: NEVER ATTEMPT TO OVERRIDE THE OPERATION OF

 

THIS SWITCH.

 

 

ADJUSTING THE DRAG BAR - (FIGURE N)

DANGER: Avoid accidental starting. Release bail handle to turn tiller off, wait until the tines stop and remove safety key prior to adjusting the drag bar.

To adjust the drag bar, remove the hairpin cotter pin (N-1)and locating pin (N-2). Align the drag bar hole in the desired position with the frame hole. Reinsert bolt and cotter pin.

For deeper tilling, the drag bar should be positioned in the lowest position.

10

N

Page 9 Page 11
Page 10
Image 10
Black & Decker CTL36 instruction manual Operating Instructions, Future reference, Charger receptacle
Page 9 Page 11

CTL36 specifications

The Black & Decker CTL36 is a versatile and powerful cordless tool designed to enhance efficiency and ease of use for both professional tradespeople and DIY enthusiasts. This tool epitomizes reliability and innovation, catering to a variety of applications from heavy-duty tasks to delicate work.

One of the standout features of the CTL36 is its robust 36V Lithium-Ion battery. This battery technology not only ensures longer run times but also provides fade-free power throughout its use. Unlike traditional battery systems that may lose strength as they drain, the Lithium-Ion technology of the CTL36 maintains consistent performance, allowing users to complete their tasks without interruptions.

The CTL36 is equipped with an efficient brushless motor. Brushless motors are known for their durability and efficiency, offering greater torque and longer motor life compared to brushed counterparts. This means that users can expect higher performance levels and less maintenance over time, increasing productivity on job sites.

Another notable characteristic of the CTL36 is its ergonomic design. It features a lightweight and compact structure that allows for easy handling and maneuverability. The rubber grip on the handle further enhances comfort, reducing fatigue during prolonged use. This is particularly important for professionals who rely on their tools day in and day out.

The tool is also designed with a range of features that enhance its versatility. It includes adjustable speed settings, allowing users to switch between high speed for fast cutting and low speed for more control in intricate tasks. Additionally, the CTL36 comes with an LED work light, providing illumination in darker spaces, thereby ensuring safety and accuracy.

Safety features are also integrated into the design, with an electric brake that halts the tool's operation instantly when the trigger is released, minimizing the risk of accidents. This is a critical feature in busy work environments where safety is paramount.

In conclusion, the Black & Decker CTL36 is a well-rounded cordless tool that combines advanced technologies such as Lithium-Ion battery and brushless motor with user-friendly features like adjustable speed and ergonomic design. Perfect for a wide range of applications, it signifies Black & Decker's commitment to delivering high-quality, reliable products that meet the demands of modern users. Whether you are a seasoned professional or an enthusiastic DIYer, the CTL36 offers the performance and versatility needed to tackle any project with confidence.
Top Page Image Contents