399080-02 rev 11/15/02 10:13 AM Page 4
English
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equip- ment, such as those dust masks that are specially designed to filter out microscopic particles.
•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
•The label on your tool may include the following symbols. The symbols and definitions are as follows:
V | volts | A | amperes | |
Hz | ..........hertz | W | watts | |
min | ..........minutes | no | alternating current | |
| direct current | no load speed | ||
| ||||
| Class II Construction |
|
| earthing terminal |
|
|
| ||
............ |
| ............ | ||
| ..........safety alert symbol | .../min .... | revolutions or | |
|
|
|
| reciprocations |
|
|
|
| per minute |
FAMILIARIZATION
Large Angle Grinders and Large Angle Sanders are designed for heavy material removal in extended use applications. The following grinders and sanders are described in this manual.
D28474 | 7" Angle Grinder | 8,000 rpm |
D28493 | 9" Angle Grinder | 5,000 rpm |
D28494 | 7"/9" Angle Grinder | 6,000 rpm |
D28497 | 7"/9" Angle Sander | 6,000 rpm |
D28499 | 7"/9" Angle Grinder | 6,000 rpm |
Components
A. Trigger Switch | B. Lock On Button | |
C. Spindle Lock | D. Side Handle |
|
E. Spindle | F. Soft Mount |
|
G. Rubber Bumper |
|
|
A | C | G |
E |
|
|
F |
|
|
| B |
|
D
Features
SWITCH
The tool is controlled by a trigger switch (A). A
ROTATING REAR HANDLE (D28499 ONLY)
The rear handle can be positioned 30°, 60°, and 90° left and right of center position.
ROTATING GEAR CASE (D28474, D28493, D28494, D28497) For applications in which a tool will be dedicated for uses in edge grinding and finishing work, the gear case may be rotated 90° left or right of its original position. See page 8 for instructions on rotating the gear case.
4
