Toro TWRS manual Sensor Module Features

Sensor Module Features

1– Rain Threshold Adjustment–Adjusts the rain sensor to accumulate 1/8", 1/4", 1/2" or 3/4" (3mm, 6mm,12mm or 19mm) of rainfall before signaling the receiver to hold watering. (Factory default setting 1/4" (6mm).

2– Sensor Test Spindle–Pressed to manually activate the sensor for setup and test procedures.

3– Batteries (not shown)–Two 3V lithium batteries, installed

at time of manufacture, will provide approximately five years of service under normal use conditions.

4– Antenna–Positioned downward for maximum signal transmission strength.

5– Pipe-mountAdapter–Replaces Quick Clip mounting bracket to enable installation on 1/2" (13mm) diameter Schedule 40 PVC pipe.

6– Quick ClipTM Mounting Bracket–Simplifies sensor module installation. Adjustable pivot point for easy vertical alignment.

1	2
6
	3
	4
	5
	9