Black & Decker instruction manual Model Number GH610, Trimmer / Edger

	TRIMMER / EDGER
	INSTRUCTION MANUAL
	Model Number GH610
	to www.BlackandDecker.com/NewOwner
	to register your new product.
	PLEASE READ BEFORE RETURNING
	THIS PRODUCT FOR ANY REASON:
	If you have a question or experience a problem with your
	Black & Decker purchase, go to
	WWW.BLACKANDDECKER.COM/INSTANTANSWERS
	for instant answers 24 hours a day.
	If you canʼt find the answer or do not have access to the internet,
	call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri
	to speak with an agent.
	Please have the catalog number available when you call.
	SAVE THIS MANUAL FOR FUTURE REFERENCE.
	VEA EL ESPAÑOL EN LA CONTRAPORTADA.
	POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIOY
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE		1
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Model No. GH610

KEY INFORMATION YOU SHOULD KNOW:

• The guard must be installed before trimming or edging - if not, the motor will overheat (page 5).

• When replacing the line, use only .065 inch diameter ROUND line (B&D Model No. AF-100 is recommended) - otherwise the tool will not function properly (page 8).

• Do not bump the feed head against the ground - it will disrupt the feed mechanism.

• Always use the cord retention feature (page 7).