ATTACHING THE AUXILIARY HANDLE
• To attach the handle, press in on the buttons (f) on both sides of the upper housing as 3 shown in figure 3.
f
• Position the handle as
shown in figure 4 (with the 4 Black & Decker logo facing upward). Partially push the handle on so that it will hold the buttons in when you release them with your hand.
•Push the handle completely onto the housing and position it slightly until it “snaps” into place (figure 5).
•To adjust the handle up or down, press in on the button
(g) and raise or lower the handle.
•The handle should be adjusted so that your front arm is straight when the trimmer is in the working position.
HEIGHT ADJUSTMENT
• The overall height of the trimmer can be adjusted by loosening the collar (h) and rotating it in the direction of thearrow shown in figure6.
• Move the upper housing straight up or down. When the desired height is achieved, tighten the collar by rotating it opposite of the direction shown in figure 6.
6
5 |
g |
6 |
h 
