Black & Decker LST136 Tangled more frequently than Black & Decker factory wound, Replacing, Spool

• Align the tabs on the spool	R
cap withtheslots(R1) in the
housing (figureR).
• Push the cap onto the
housing until it snaps securely
into place.
CAUTION: To avoid tool	R1	R2
damage, if the cutting line
protrudes beyond the
trimming blade, cut it off so that it just reaches the blade.

REWINDING SPOOL
NOTE: Hand wound spools from bulk line are likely to become
(USEONLY.065 IN.ROUNDDIAMETERLINE)(FIGURESS,T & U)
tangled more frequently than Black & Decker factory wound
spools. For best results, factory wound spools are
recommended.
To rewind spool, follow the steps below:
• Remove battery from tool.	S
• Remove the empty spool	S1
from the tool as described
in “REPLACING THE	S2
• Make a fold at the end of
SPOOL”.
the cutting line at about 3/4
inch (19mm)(S1). Feed the
cutting line into one of the
line holding slots (S2) as
shown in figure S.

• Insert the 3/4 inch (19mm)		T2
end of the bulk line into the	T	T1
hole (T1) in the spool
adjacent to the slot as
shown in figure T.

• Wind the cutting line onto the spool in

the direction of the arrow on the spool. U Make sure to wind the line on neatlyand

•When the wound cutting linefigurereachesU

the recesses ( ), cut the line. ( )

•Fit the spoolT2onto the tool as describedfigureT

in “REPLACING THE SPOOL”.in layers. Do not crisscross( ). .

TheHERBRC™RBRC™(RechargeableSEAL

Battery Recycling Corporation)

Seal on the Li-Ion battery (or

battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by

. RBRC™ in cooperation withand otherBlack & batteryDeckerusers, has established programsBlackin the& DeckerUnited States to facilitate the collection of spent Li-Ion batteries. Help protect our environment and conserve natural resources by returning the spent

Li-Ion battery to an authorizedservicecenterortoyour local retailer for recycling.YoumayBlalsocontactyourlocalrecyclingcenterforck& Decker

information on where todropoff thespentbattery. RBRC™is a registered trademark of the Rechargeable Battery RecyclingCorporation.

12