Black & Decker LST136 instruction manual Please read before returning this product for any reason

40V MAX* lithium TRIMMER / EDGER

INSTRUCTION MANUAL

Model Number LST136

Thank you for choosing Black & Decker! Go to

www.BlackandDecker.com/NewOwner

to register your new product.

Please read before returning this product for any reason:

If you have a question or experience a problem with your

Black & Decker purchase, go to

www.blackanddecker.com/instantanswers

for instant answers 24 hours a day.

If you can’t find the answer or do not have access to the internet,

call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri

to speak with an agent.

Please have the catalog number available when you call.

Save this manual for future reference.

VEA EL ESPANOL EN LA CONTRAPORTADA.

POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈre.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. *Maximum initial battery pack voltage (measured without a workload) is 40 volts. The nominal voltage is 36.

Model # LST136

KEY INFORMATION YOU SHOULD KNOW:

•The guard must be installed before trimming or edging - if not, the motor will overheat (page 8).

•When replacing the line, use only .065 inch diameter ROUND line (B&D Model #AF-100 is recommended) - otherwise the tool will not function properly (page 11).

•Do not bump the feed head against the ground - it will disrupt the feed mechanism.

•For use only with LB series 36v or 40v Max* batteries.

1