HELPFUL• CUTTINGTIPSdo not force string headUseintothe uncuttip of grassthe tring. Use toedgedo guidethe cuttialong;such things as fences, houses and flower beds for best practices.

• Wire and picket fences cause extra string wear, even breakage. Stone and brick walls, curbs, and wood may wear string rapidly.

• Do not allow spool cap to drag on ground or other surfaces.

• In long growth cut from the top down and do not exceed 12 inches (304.8 mm) high.

• Keep trimmer tilted toward the area being cut; this is the best cutting area.

• The trimmer cuts when passing the unit from the right to left. This will avoid throwing debris at the operator.

• Avoid trees and shrubs. Tree bark, wood moldings, siding, and fence posts can easily be damaged by the string.

CUTTINGYour trimmerLINE /usesLINE FEEDING

. During .065use, inchthe tips(1.65of themm)nylondiameter,lines willROUNDbecome frayednylon liande worn and the special self feeding spool will automatically feed and trim a fresh length of line.

unit on ground in attempt to feed line or for any otherDOpurposesNOT BUMP. Cutting line will wear faster and require more feeding if the cutting or edging is done along sidewalks or other abrasive surfaces or heavier weeds are being cut.

REPLACEMENT ACCESSORIES

Before you begin trimming, only use the appropriateCAUTION:type of cutting line.

Use Black & Decker replacement spool Model No. AF-100.

• USE ONLY .065 inch (1.65 mm) DIAMETER ROUND NYLON MONOFILAMENT LINE. Do not use serrated or heavier gauge line, as they will overload the motor and cause overheating.

• Other replacement parts (guards, spool caps, etc.) are available

through Black & Decker service centers. To find your local service location call: 1-800-544-6986

or visit

P

P2

WARNING: The use of

any accessory not

Replacement

 

www.blackanddecker.com.

 

 

recommended by Black &

spool

 

Decker for use with this tool

Model #

 

could be hazardous.

AF-100

 

REPLACING THE SPOOL

 

 

(FIGURES• Remove batteryP,Q ANDfromR) tool.

P1

P1

• Depress the tabs (P1) and

 

P3

remove the spool cap (P2)

 

from the spool housing (P3)

 

 

in the trimmer head (figure P).

 

 

• Replace spool with Black & Decker model # AF-100.

 

• Grasp empty spool with one hand and spool housing with other

hand and pull spool out.

 

 

• If lever (Q1) in base of

Q

 

housing becomes dislodged,

Q1

replace in correct position

 

before inserting new spool

 

Q2

into housing.

 

• Remove any dirt and grass

 

 

from the spool and housing.

 

 

• Unfasten the end of the

 

 

cuttingline and guide the line

 

 

into the eyelet (R2) figure R.

 

 

• Take the new spool and

 

 

push it onto the boss (Q2) in

 

 

the housing. Rotate the spool

 

 

slightly until it is seated.

 

 

The line should protrude

 

 

approximately 4-13/16 inches

 

 

(122mm) from the housing.

 

 

11

Page 10 Page 12
Page 11
Image 11
Black & Decker LST136R Replacement Accessories, CUTTINGYour trimmerLINE /usesLINE Feeding, Or visit, Replacing the Spool
Page 10 Page 12

LST136R, LST136-36V, LST136 specifications

Black & Decker has long been a trusted name in power tools and outdoor equipment, and their line of string trimmers is no exception. Among their notable offerings are the LST136, LST136-36V, and LST136R models. Each trimmer brings unique features and technologies to the table, designed to cater to a variety of gardening and landscaping needs.

The Black & Decker LST136 is a versatile cordless string trimmer powered by a 40V lithium-ion battery. This model is designed for ease of use and efficiency, making it an ideal choice for homeowners looking to maintain their lawns without the hassle of cords or gas. One of its standout features is the automatic feed spool, which ensures a continuous supply of line without the need for manual adjustments. Additionally, the trimmer offers a dual-line system for enhanced cutting performance, allowing you to tackle tougher weeds and thicker grass with ease.

The LST136-36V is a slightly more advanced version, boasting a 36V lithium-ion battery that provides longer run times and more power. This model is perfect for those who need a bit more oomph in their trimming tasks. It also features an adjustable height and handle, ensuring user comfort during extended use. The LST136-36V is designed for maneuverability, with a lightweight construction that makes it easy to navigate around flower beds, fences, and other obstacles in the yard.

Lastly, the LST136R offers a robust set of features, including a bump feed system that allows operators to release additional line with a simple tap on the ground. This model is also equipped with a 40V lithium-ion battery, similar to the LST136, and provides ample power for a variety of trimming jobs. The LST136R stands out with its ergonomic design, which prioritizes user comfort and reduces fatigue during long trimming sessions. Its built-in battery indicator lets users know how much charge is left, ensuring that you don’t run out of power mid-job.

In summary, the Black & Decker LST136, LST136-36V, and LST136R string trimmers each combine power, efficiency, and user-friendly features. Whether you’re a casual homeowner or a serious gardener, these trimmers provide reliable performance to keep your outdoor spaces looking their best. With innovations like automatic feed spools, adjustable settings, and lightweight designs, Black & Decker continues to lead the charge in outdoor power equipment.
Top Page Image Contents