English
Setting the Clock
When the microwave oven is connected to a suitable electrical supply, the oven will display "0:00".
To set the correct time, for example: To set 8:00 .
Clock/
1. Press the
2. Press the number buttons "8","0","0" in order.
3. Press the 
button to finish setting the clock. The time will be shown in the LED display.
Note: If "STOP/CLEAR" | Stop | button is |
Clear |
pressed or if there is no operation within 1 minute, the oven will revert to its previous state automatically.
Use (Fig. C)
Using the handle (8) open the door (6) then place the container onto the glass tray (4).
Close the door & press the Power | Power |
button repeatedly until the required power setting is shown in the LED display.
The Microwave power level can be adjusted to suit the required cooking
method. There are five power settings
available. These are:
Press power once | Power | 100% |
The LED display will show |
| "P100" |
Press power twice | Power | 80% |
| ||
The LED display will show |
| "P 80" |
Press power three times | Power | 50% |
| ||
The LED display will show |
| "P 50" |
Press power four times | Power | 30% |
| ||
The LED display will show |
| "P 30" |
Press power five times | Power | 10% |
| ||
The LED display will show |
| "P 10" |
Enter the required cooking time using the numbered buttons on the control panel (1).
Note: The maximum microwave cooking time is 100 minutes and 39 seconds.
Start
Press the "Start / Express Cook" Speed Cook button to start cooking.
Example: To cook an item at 50% power for 10 minutes
1 Press the Power Power button three times so that P50 shows in the LED.
2Press the numeric buttons 1, 0, 0, 0 in sequence
Start
3 Press the “Start/Express Cook” Speed Cook button to start cooking
Note: During power cooking, the Power Power button can be pressed to display the current microwave power in the LED for 3 seconds. After three seconds, the display will revert to normal.
