Black Box 1121A, AC1120A, 1123A, 1122A Scheduling Auto recall of Preset Patterns, To set a schedule

Model AC1120A, AC1121A, AC1122A, AC1123A

Enter the second (00-59):

Enter AM/PM (0-1):

Notes: You have 16 seconds to make your selection, or the command is cancelled. To skip the current prompt without making a change, press ENTER.

Invalid entry<cr>

Cancelled <cr> if invalid value was entered.

Cancelled <cr> if ESC was entered.

3.2.11 Scheduling Auto recall of Preset Patterns

The matrix provides up to 4 specific times throughout the day where any preset patterns (0 to 16) can be recalled. You can set a schedule that is the same every day (daily) or is different for weekdays and weekends. Presets 1 to 16 are those saved by the user, and preset 0 disconnects all video and audio outputs

Notes on Scheduling Presets

When defining a schedule, to skip the current prompt without making a change, press ENTER. Press ESC to exit the schedule setting at any time. Timer values should be entered in the proper order meaning that Timer1 should occur prior to Timer2, Timer2 should occur prior to Timer3, and etc. Timers will be disabled if hour, minute, and AM/PM are set to 0. So if for example, your schedule only has to set the pattern once in the morning, leave the data for timers 2 through 4 at zero and only enter values for timer 1. If Timer values are not set properly (in ascending order), an error message will be prompted

3.2.11.1 To set a schedule
Command: SS<cr>		stands for Schedule Set (current schedule is displayed)
Response:
------------------ Weekday ------------------ (on/off)			(on/off) indicates if
Timer1 = 06:00am		Preset Pattern = 1	the Schedule is in-
Timer2 = 12:05pm		Preset Pattern = 3	effect or not.
			Weekday and
Timer3 = 05:30pm		Preset Pattern = 7
Timer4 = 09:00pm		Preset Pattern = 12	weekend are both
			on or both off.
------------------ Weekend ------------------ (on/off).			If the 4 timers are
			not in ascending
Timer1 = 02:00am		Preset Pattern = 1	order, the unit
Timer2 = 06:00am		Preset Pattern = 5	does not let you
Timer3 = 12:00pm		Preset Pattern = 13	turn the schedule
			on; fix any
Timer4 = 06:00pm		Preset Pattern = 16
			inconsistencies
			before turning on.
Select Schedule Setting			00:00am is not a
1	= Weekday		valid time setting
2	= Weekend		and is used to turn
			off a timer
3	= Daily

20