Motorola RMU2080D manual Hands Free without Accessories iVOX, Toggle Voice Prompt in User Mode

Hands Free without Accessories (iVOX)

	• Press the PTT button while turning ON the radio
STARTED	to enable iVOX. The icon	blinks.
	• iVOX can be temporarily disabled by pressing the
	PTT button.
	• A short press of the PTT Button re-enables iVOX.
	Note:
GETTING	• There is a short delay between the time when you
	Sensitivity” on page 35.
	start talking and when the radio transmits.
	• For more information on setting VOX/iVOX
	sensitivity, refer to “Setting VOX /iVOX

Toggle Voice Prompt in User Mode

Short press the SB1 Button while turning ON the radio to enable/disable the Voice Prompt in User Mode. (Default is set to ON).

Power Up - Tone Mode

To enable/disable power up tone mode, press SB1 and SB2 buttons simultaneously for 2-3 seconds while powering up the radio until you

English 34

hear the pre-programmed power up tone. 3 different power-up tones are available:

•Power up tone and channel number announcement, or

•Battery level and channel number announcements, or

•Silent (Audible tones disabled)

Reset to Factory Defaults

Reset to Factory Defaults will set back all radio features to the original factory default settings. To do so, press PTT, SB2 and SB1 simultaneously while turning ON the radio until you hear a high tone chirp.

Keypad Beeps

To enable/disable Keypad Beeps, short press the SB2 button while turning ON the radio until you hear ‘chirp’ tone.