Motorola RMU2080D manual Vox, VOX, enable

	Programmable Via		Programmable via
	Advanced
				CPS
Features	Configuration					Default Value	Programming Tips
	Display	Non-	Display		Non-
		Display			Display
							Front panel radio programming available in display
VOX						OFF	models by pressing PTT or	(MENU) buttons
Sensitivity	Yes	No	Yes		Yes
						(level 0)
Level							and scrolling down/up with	and
							buttons to set value. Long press PTT to save.
							Allows to use ‘hands-free’ mode connecting
							microphone accessories. To enable connect
VOX, enable/	Yes	Yes	Yes		Yes	OFF	external accessory and power up radio.
disable							Note: The VOX sensitivity level default value is set
							to OFF in the CPS settings. Before using this
							feature, check VOX sensitivity level.

(1)To enter Advanced Configuration Mode, press and hold both PTT and SB1 simultaneously for 3-5 seconds while turning radio ON (LED will start to blink green). Short press PTT to get to the different programming options.

(2)Using CPS you can prevent this feature to be programmed via front panel radio.

(3)Contact your Motorola Point of purchase for enabling this feature and/or for radio models details.

(4)For Non-Display Models, feature can be enabled for front panel programming by assigning feature to SB1 or SB2. For Display models: Feature can be enabled to any of the programmable buttons rather than the default ones. For more details refer to Programming Buttons Chart or CPS Menus.

87