CLONING RADIOS
You can clone RM Series radio profiles from one Source radio to a Target radio by using any one of these 3 methods:
•Using a Multi Unit Charger (MUC- optional accessory),
•Using two Single Unit Chargers (SUC) and a
•the CPS (free software download)
Cloning with a Multi Unit Charger (MUC)
Pocket 1 | Pocket 4 |
“CLONE” symbol Pocket 2 “CLONE” symbol Pocket 5
To clone radios using the MUC, there must be at least two radios:
•a Source radio (radio which profiles will be cloned or copied from) and
•a Target radio (the radio which profile will be cloned from the source radio.)
The Source radio has to be in Pocket 1 or 4 while the Target radio has to be in Pocket 2 or 5, matching in the MUCs pockets by pairs as follows:
•1 and 2 or,
•4 and 5.
When cloning, the MUC does not need to be plugged into a power source, but ALL radios require charged batteries.
1.Turn ON the Target radio and place it into one of the MUC Target Pockets
2.Power the Source radio following the sequence below:
•Press the PTT button and SB2
PROGRAMMING FEATURES
51English
