| Programming Scan List | ||
FEATURES | |||
You can enable or disable the Channel | |||
| |||
| Scanning feature for each channel in your | ||
| radio. To do so, enter the Advanced | ||
| Configuration Mode and select the channel you | ||
| want to program. Scroll through the | ||
PROGRAMMING | programming modes by short pressing the PTT | ||
button or | (Menu) button until you reach | ||
| |||
| the ‘Scan Programming Mode’. | ||
| The radio display shows the Scan | ||
| Programming Mode as follows: | ||
Both the channel number and current scan setting (YES = Enable or NO = Disable) blinks on the display, indicating you can choose your setting. To set the channel number, rotate the Channel Selector Knob until you reach the desired channel number.
English 44
Once you have selected the channel, proceed to enable (‘YES’) or disable (‘NO’) the scan feature by pressing the SB2 (*) button. Once you have set the values you need, long press the PTT button to exit and save, or short press the PTT button to move to the next programming feature without saving.
Note:
•(*) This assumes the SB2 button is not programmed for a different mode.
•If the Maximum Channel setting in the radio is set to ‘1’, the Scan Programming option is disabled and will not show on the radio display.
Programming Weather Channel
Weather Channel Programming Mode is the last programming mode available. You can enable or disable the Weather Channel.
To do so, enter the Advanced Configuration Mode and select the channel you want to program. Scroll through the programming modes by short pressing the PTT button or
