The radio display shows the CTCSS/DPL code as follows:
To program the desired code, use the 
and 
buttons until you get the CTCSS/DPL code value you want to set up. Long press the PTT button to exit and save, or short press the PTT
button to move to the next programming feature without saving.
PROGRAMMING SCRAMBLE 
The scramble feature makes your transmissions sound garbled to anyone listening without the same scramble code. It does not guarantee confidentiality, but it adds an extra layer of privacy. Scramble mode is by default set to ‘OFF’.
Once you have entered Advanced Configuration Mode and selected the channel in which you want to enable Scramble (
), scroll up or down through the programming modes by short pressing the PTT button or 
(Menu) button until the radio reaches the Scramble Programming Mode.
The radio display shows the Scramble settings as follows:
The current scramble value blinks. You can select the desired scramble value (0,1,2 or 3)
by pressing the 
and 
buttons. Long press the PTT button to exit and save, or short press the PTT button to move to the next programming feature without saving.
Note: The values available for scrambling are dependent to the values programmed via
PROGRAMMING FEATURES
39English
