Motorola RMU2080D manual Programming Maximum Number, Channels, Programming Call Tones

	the CPS. Scramble is disabled when the
FEATURES
	value is set to ‘0’.
	channels for the radio. Once you have entered
	PROGRAMMING MAXIMUM NUMBER OF
	CHANNELS
	You can configure the maximum number of
PROGRAMMING	the Advanced Configuration Mode, scroll up or
	down through the programming modes by short
	pressing the PTT button or	(Menu) button
	until you reach the ‘Maximum Channel
	Programming Mode’.
	The radio display shows the Maximum Number
	of Channels as follows:
	MAX CH

The radio display blinks the current maximum number of channels programmed. Use the and buttons until you get the desired

English 40

maximum number of channels. Long press the PTT button to exit and save, or short press the PTT button to move to the next programming feature without saving.

Note: The values available for maximum channel settings are dependent on the maximum number of channels the radio supports.

PROGRAMMING CALL TONES

Call Tones feature allows you to transmit an audible tone to other radios on the same channel to alert them that you are about to talk or to alert them without speaking.

In ‘Call Tone Selection Mode’ you can configure the type of call tone for the radio. The settings available are dependent on the maximum number of call tones your radio supports.

To program Call Tones, enter the Advanced Configuration Mode and scroll up or down through the programming modes until your display radio shows the ‘Programming Call