| Nuisance Channel Delete | |
FEATURES | ||
Nuisance Channel Delete allows you to | ||
| ||
| temporarily remove channels from the Scan | |
| List. This feature is useful when irrelevant | |
| conversations on a ‘nuisance’ channel ties up | |
| the radio’s scanning feature. | |
PROGRAMMING | To delete a channel from the Scan List: | |
• Start Scan mode by short pressing the SB2(*) | ||
| ||
| button. | |
| • Wait until the radio stops at the channel you wish | |
| to eliminate. Long press the SB2 button to delete | |
| it. You cannot delete the channel with scan | |
| enabled (home channel). | |
| • The channel will not be scanned again until you | |
| exit the Scan mode by short pressing the SB2 | |
| button again or by turning OFF the radio and | |
| ||
| back ON. | |
| Note: (*) This assumes the SB2 button is not | |
| programmed for a different mode. |
English 46
CUSTOMER PROGRAMMING SOFTWARE (CPS)
Radio to be programmed
USB Ports
CPS Programming Cable
Figure 1: Setting up the radio to the CPS
The easiest way to program or change features in your radio is by using the Customer Programming Software (CPS) and the CPS Programming Cable(*). CPS Software is available for free as web based downloadable software at:
www.motorolasolutions.com/RMseries
