AC211A-R2 & AC216A-R2

Chapter 3 : OPERATING MODE

3-1. SETTINGS

cWe recommend resetting the device to all of its default values, with the front panel display menu (CONTROL > default value > yes) before proceeding.

dSelect the input type connected to the INPUTS with the front panel display menu (INPUT > input type).

eFor the AC216A-R2 only, select the output type with the front panel display menu (OUTPUT > output type).

fSelect the output format which corresponds to your display device with the front panel display menu (OUTPUT > output format).

gSelect one of the output rate available with the front panel display menu (OUTPUT > output rate). h Select the output sync type with the front panel display menu (OUTPUT > output sync).

3-2. IMAGE ADJUSTMENTS

For each input source connected to the device, make the following adjustments:

cSelect the source you want to adjust (with the front panel "INPUT SELECTION" buttons).

dSelect the aspect ratio of your input source with the front panel display menu (IMAGE > aspect ratio in). e Adjust the image in your display device with the position & size functions (IMAGE > pos settings).

fIf needed, make the others adjustments, available in the IMAGE menu (color, brightness…).

NOTE: To set the image adjustments to the factory settings, use the Preset function (IMAGE > preset > yes).

3-3. AUDIO ADJUSTMENTS

cAdjust the master volume (AUDIO > master volume).

dFor each audio input, adjust the level (AUDIO > audio level) and the balance (AUDIO > audio balance).

PAGE 12