AC211A-R2 & AC216A-R2

Chapter 1 : INTRODUCTION (continued)

1-8. AC216A-R2 PLUS FRONT PANEL DESCRIPTION

LCD CONTROL

ENTER: Validates a selected item.

A long push on this button allows to activate the STANDBY mode. A short push on a front panel push button allows to wake up the device.

Allows to scroll thru the different menus (in Control mode).

FREEZE:A short push allows to freeze the displayed output.

INPUT SELECTION: Selection of the 3 input sources.

C.VIDEO 1: Composite source #1 selection (Input #1).

C.VIDEO 2: Composite source #2 selection (Input #2).

RGB/YUV: RGBS & YUV source selection (Input #3).

S.VIDEO: S.VIDEO source selection (Input #4).

COMPUTER: Computer source selection (Input #5).

NOTE: A long push (2 seconds) on the selected input button allows to active the BLACK function. A black screen is displayed onto the output. A short push on an INPUT SELECTION button allows to inactive this function.

1-9. AC216A-R2 PLUS REAR PANEL DESCRIPTION

IP/LAN

ON / OFF: AC power switch (O = OFF, I = ON).

POWER:Standard IEC connector (100-250 VAC, 1A, 50-60Hz automatic).

AUDIO IN & OUT

1, 2, 3, 4 & 5: Audio stereo inputs on MCO connectors.

L: Left, R = Right.

OUT:Audio stereo output on a MCO connector.

INPUT SOURCES

1-C.V:Composite Video input #1 on a BNC female connector.

2-C.V:Composite Video input #2 on a BNC female connector.

3-RGB/YUV:RGBS & YUV (Y, Cr, Cb) video input on 4xBNC female connectors.

4-S.VIDEO:S.VIDEO (Y/C) input on 4-pin mini DIN female connector.

5-COMPUTER:Computer input on a HD15 female connector.

RS-232:RS-232 communication port on a DB9 female connector.

DISPLAY OUTPUTS

ANALOG: Analog computer output (RGBHV, RGBS or RGsB) on a HD15 female connector.

DVI-I:Digital & analog computer output on a DVI-I female connector.

PAGE 9