Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) | |
4 [AUDIO] + ENTER. | + ENTER: |
Select an item with | |
•[Auto follow]: The audio follows the video image.
•[Input #1]: The input #1 audio source is permanently diffused.
•[Input #2]: The input #2 audio source is permanently diffused.
•[Input #3]: The input #3 audio source is permanently diffused.
•[Input #4]: The input #4 audio source is permanently diffused.
•[Input #5]: The input #5 audio source is permanently diffused.
5 [FRAME] + ENTER. | + ENTER: |
|
Select an item with |
| |
| ||
• [Captured input]: Allows to capture the frame | + ENTER. | |
•[Off]: Allows to switch off the frame.
•[Auto]: Allows to display the frame in case of lost of input signal on the selected input.
[Delete frame] + ENTER. |
|
| ||
| Allows to delete the frame stored. |
|
| |
6 [CONTROL] + ENTER. |
|
|
| |
[Versions] + ENTER. |
|
|
| |
| Version _._: update version. | I: Identification number. | K, S, O, V: Internal firmware versions. | |
[Key locking] + ENTER. |
|
| ||
| Select an item with | and change the mode with ENTER. |
| |
•[All]: Locks/unlocks all the front panel switches.
•[Menu]: Locks/unlocks the LCD CONTROL switches.
•[Input]: Locks/unlocks the INPUT SELECTION and FREEZE switches.
Select an item and validate with ENTER.
•[Off]: Disable the 2:2 pull down correction.
•[Auto]: Automatic recognition and correction of the 2:2 pull down.
•[On]: Allows to switch off the frame.
This function allows adjusting the duration of the black during a transition. Select en item and validate with
ENTER.
•[Short]: Delay = 0 second.
•[Medium]: Delay = 1.5 seconds.
•[Long]: Delay = 3 seconds.
When the device any more detect a signal on the selected input, this one is set in the STANDBY mode after the
duration of your choice. Select a duration with + ENTER.
NOTE: A long push on the ENTER button allows to manually activate the STANDBY mode. A short push on a front panel push button allows to wake up the device.
PAGE 19