Black Box AC211A-R2, AC216A-R2 manual 18

Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued)			AC211A-R2 & AC216A-R2
4-5. FUNCTIONS DESCRIPTION (continued)
3 [IMAGE] + ENTER.
3-1 [Pos./size adj.] + ENTER.		+ ENTER.
Select one of the following function with
3-1-1	[H position] + ENTER.	+ ENTER.
	Adjust the Horizontal position with
3-1-2	[V position] + ENTER.	+ ENTER.
	Adjust the Vertical position with
3-1-3	[H size] + ENTER.	+ ENTER.
	Adjust the Horizontal size with
3-1-4	[V size] + ENTER.

Adjust the Vertical size with		+ ENTER.
3-2 [Aspect in] + ENTER.			+ ENTER.
Select the Aspect Ratio of your input source with
• [4/3 standard]:	4/3 input format.

•[16/9 letterbox]: Letterbox input format.

•[WS anamorphic]: Widescreen Anamorphic input format.

•[Return]: Allows to return to the previous menu without safeguarding.

3-3 [Aspect out] + ENTER.	+ ENTER.
Select one of the following output aspect ratio with

•[Standard]: The entire image and the aspect ratio are preserved.

•[Crop]: The image is zoomed without deformation to fill the screen, but some borders of the image will be cropped. The aspect ratio is preserved.

•[Full screen]: The image is stretched to fill the screen. The aspect ratio is not preserved.

•[Return]: Allows to return to the previous menu without safeguarding.

3-4 [Under/over] + ENTER.	+ ENTER.
Select Underscan or Overscan with

•[underscan]: Underscan mode. The entire image is visible on the screen. Computer mode is underscan.

•[overscan]: Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid seeing the corners and the borders. Standard TV display mode is overscan.

3-5	[Brightness] + ENTER.	+ ENTER.
	Adjust the brightness with
3-6	[Contrast] + ENTER.	+ ENTER.
	Adjust the contrast with
3-7	[Color] + ENTER.	+ ENTER.
	Adjust the color with
3-8	[Hue] + ENTER.		+ ENTER.
	Adjust the tint of the picture (NTSC only) with
3-9	[Sharpness] + ENTER.	+ ENTER.
	Adjust the sharpness with

3-10 [Preset] + ENTER.

This function allows setting all the image parameters to the factory settings. Select [YES] and validate with

ENTER.

PAGE 18