AC211A-R2 & AC216A-R2

Chapter 1 : INTRODUCTION (continued)

1-5. INSTALLATION

 

IMPORTANT:

Please read all the safety instructions (pages 2 to 4) before starting.

•Table Top Mounting: The devices can be used directly on a table: they are equipped with 4 plastic feet.

•Rack Mounting: The AC216A-R2 is compatible with a 19" enclosure. To install the device into a 19” rack: Attach the device to the rack by using 4 screws in the front panel holes (screws are not included). Connect all of the cables to the devices and attach them to the rack with some tie wraps.

IMPORTANT: • The openings in the rear and side panels are for cooling. Do not cover these openings.

•Be sure that no weight is added onto the device in excess of 2 kg (4.4 lbs.).

•The maximum ambient operating temperature must not exceed 40°C (104°F).

•The rack and all mounted equipment in it must be reliably grounded to national and local electrical codes.

PAGE 7