Black Box ACXC16, ACXC48, ACXC32, ServSwitch DKM FX and DKM FX Compact manual OSD and Java icons

Chapter 4: Configuration

4.8.3 Extender OSD

In this menu, the settings for the Extender OSD settings can be adjusted. These are local settings that can be made individually for each console.

You can select between the following Extender OSD settings:

Table 4-42. Mouse and keyboard settings.

Field	Selection	Description
	Activated	Enable Extender OSD (default: Yes)
Enable extender OSD
	Deactivated	Function not active
	Activated	Update connection changes during
Update connections		fade-in of Extender OSD (default: Yes)
	Deactivated	Function not active
Display time	0–999 seconds	Duration of OSD fade-in (default: 10)
Horizontal position	10 pixels	Horizontal OSD position (default: 2)
Vertical position	10 pixels	Vertical OSD position (default: 2)
Vertical position	Variable or specific	Resolution that is used when opening
	resolution	OSD

NOTE: When setting the horizontal OSD position, a prefixed minus describes the orientation to the right edge of the monitor, for example, -2 means 2 x 10 = 20 pixels of distance to this edge. When setting a vertical position, a prefixed minus describes an orientation to the bottom edge of the monitor.

If the “Update Connections” function is deactivated, the Extender OSD only appears when switching via OSD.

You can access the menu in two ways: via OSD or Java.

Figure 4-54. OSD and Java icons.

OSD

Select “Configuration > EXT Units” in the main menu.

724-746-5500 blackbox.com Page 121