6 Insert the SD Memory Card.
①Push the Slot Cover to open it.
②Insert the SD Memory Card as illustrated. (Label side up).
7 Select “SD Card”.
zOnly one storage device can be selected at a time. When the "SD Card" is selected as a storage device, the scanned image cannot be saved to the PCMCIA/PC Card or Hard Disk Drive at the same time.
8 Press the Start key.
Scanned image is saved in the following directory of the SD Memory Card.
zDirectory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
zWhen scanning from the Platen Glass, place the next original, and then follow the instructions described on the touch panel display.
9 Push the SD Memory Card, and then remove it.
zDo not remove the SD Memory Card while the Access Indicator is flashing.
10 Close the Slot Cover.
zWhen canceling the operation, press the Stop key on the Control Panel, and then select “Yes” on the Touch Panel Display.
Operations Scan/Email 2 Chapter
11