6 Insert a PCMCIA/PC Card Adapter with a memory card.
①Push on the slot cover to open it.
②Insert a PCMCIA/PC card into the PCMCIA/ PC Card slot as illustrated. (Label side up)
7 Select “PC Card”.
zOnly one storage device can be selected at a time. When the "PC Card" is selected as a storage device, the scanned image cannot be saved to the SD Memory Card or Hard Disk Drive at the same time.
8 Press the Start key.
The scanned image is saved into the PCMCIA/PC Card.
The scanned data is saved on the following directory of the memory card.
zDirectory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
zWhen scanning from the Platen Glass, place the next original, and then follow the instructions described on the touch panel display.
9 Push the Eject button on the right side
of PCMCIA/PC Card slot, and then remove the PCMCIA/PC Card Adapter.
Eject button
zDo not remove the PCMCIA/PC Card while the Access Indicator is flashing.
10 Close the Slot Cover.
zWhen canceling the operation, press the Stop key on the Control Panel, and then select “Yes” on the Touch Panel Display.
Operations Scan/Email 2 Chapter
13