Black Box DP-C262 C322 Setting the Scanning Quality, Quality Adjustment

Settings Scanner 3 Chapter

28

Chapter 3	Scanner Settings
Setting the Scanning Quality

Documents, whether in Full Color or Monochrome, are scanned in three-colors.

zColor mode settings are reset to their factory defaults when: -The machine is turned Off.

-The Reset key is pressed. -A scan job is completed.

1 Select “Basic Menu”.	Quality Adjustment
	„ Color Setting
		Full Color Mode

Color Original	Three-colors
	(Red, Green
Grayscale Mode	and Blue)

2 Set the desired scanning modes.

Color Original	Grayscale
	(Halftone)
Black Mode

			Color Original			Monochrome
						(Bi-level)
Quality		Adj. (see page 28)
File Type and Name (see page 36)
(Continue from step 3)				Monochrome	Original		Monochrome
Original Size:						(Bi-level)
			1 Select the Color Mode, and then “OK”.
	From Platen Glass only.
	When the original size is not correctly
	detected, select “Original Size”, and then
	select original size and touch “OK” on the
	display.
2-Sided Original (see page 38)
Job Build and SADF (see page 39)
Multi-Size Feed:
	When scanning mixed size originals, select
	“Multi-Size Feed”.
	Ex: 8.5 x 11" and 11 x 17" size originals