Chapter 5: Operation of Web-based Management
Figure 5-12. Port Isolation configuration.
Parameter description:
Port Members: A check box is provided for each port of a private VLAN. When checked, port isolation is enabled on that port. When unchecked, port isolation is disabled on that port. By default, port isolation is disabled on all ports.
5.2.6 Aggregation (LGB2118A Only)
The Aggregation (Port Trunking) Configuration is used to configure the settings of Link Aggregation. You can bundle ports by the same speed, MAC, and full duplex to be a single logical port, so the logical port can aggregate the bandwidth of these ports. This means you can use your current Ethernet equipment to build the bandwidth aggregation. For example, if three Fast Ethernet ports are aggregated into a logical port, then this logical port’s bandwidth would be three times as high as a single Fast Ethernet port’s.
Function name: Aggregation Configuration
Function description: Display the current setup of Aggregation Trunking. With this function, the user is allowed to add a new trunking group or modify the members of an existing trunking group.
Figure 5-13. Aggregation/Trunking Configuration.
Parameter description:
Normal: Set up the ports that do not join any aggregation trunking group.
Group 1–8: Group the ports you choose together. Up to 12 ports can be selected for each group.
Page 55 |
