724-746-5500 | blackbox.com
Page 68
Chapter 5: Operation of Web-based Management
5.3.4 Ping Status
Function name: Ping Status
Function description: Set up a target IP address for ping function and display ping status. In Fig. 5-27, the window shows the ping
information.
Figure 5-26. Ping.
Parameter description:
Ping Parameters:
Target IP address: Set up a Target IP address to ping.
Count: Use the drop-down menu to set number of echo requests to send. Choose from four numbers: 1, 5, 10, and 20.
Default: 1
Time Out (in secs): Use the drop-down menu to set number of echo requests time out in seconds. Choose from four numbers:
1, 5, 10, and 20. Default: 1.
NOTE: Press the “Apply” button to start up after you set up the parameters.
Ping Results:
Target IP address: Show the active target IP address.
Status: Show the result of the ping status.
Received replies: Show the received replies number of times.
Request timeouts: Show the timeout of request.
Average Response times (In ms): Show the average response time in milliseconds.