802.3af and 802.3at PoE Gigabit Injectors
4.3 Device Manager: to View Port Properties
When you are ready to begin, connect the proper end of the
To view which Serial COM Port your PoE Gigabit Injector is installed on, follow these instructions:
1. Click
Figure 4-3. System Properties screen.
Click 
and the following window will open:
Figure 4-4. Device Manager screen, Locate and expand ports (COM and LPT).
Double-click the Prolific USB-to-Serial Comm Port icon. In this example, the USB-to-Serial Comm port is installed on COM4. The COM port will vary, depending on the user.
Page 16 |
