Black Box KV0004A-LED manual Computer systems, To connect a computer system, Installation, Page

Chapter 3: Installation

4. Audio: Where required, connect the lead from your speakers to the audio socket. See Figure 3-3.

5V 2.5A

I
N
DO		OR
U
	SE
ON
	LY

OPTIONS

Figure 3-3. Connecting speakers to the user console.

3.3.2 Computer systems

Each computer system is connected to the ServSwitch Freedom unit using (up to) two cables.

To connect a computer system

1.Ensure that power is disconnected from the ServSwitch Freedom unit and the system to be connected.

2.Use a USB cable (type-A to type-B) to link a USB port on the computer system to the USB port of the required channel on the rear of the unit. See Figure 3-4.

2 1

Figure 3-4. Connecting the USB and speaker leads from a computer to the ServSwitch Freedom unit.

3. If required, use a stereo audio link cable (3.5-mm jacks at either end) to link the speaker port on the computer system to the audio port of the required channel on the rear of the unit. See Figure 3-4.

724-746-5500 blackbox.com Page 13