![3.3.4.2 Control by RS-232 serial](/images/new-backgrounds/107001/10700131x1.webp)
ServSwitch Freedom
3.3.4.2 Control by RS-232 serial
Serial port parameter settings
Ensure that the chosen serial port is configured to the following:
•Baud rate: 1200
•Data bits: 8
• | Stop bit: | 1 |
|
|
• | Parity: | None |
|
|
Serial port channel selection codes |
| |||
|
| ASCII |
|
|
|
| Character | Hex | Decimal |
• | Channel 1: | ‘1’ | 0x31 | 49 |
• | Channel 2: | ‘2’ | 0x32 | 50 |
• | Channel 3: | ‘3’ | 0x33 | 51 |
• | Channel 4: | ‘4’ | 0x34 | 52 |
Note: As each channel is chosen using the above
Page 16 |