Chapter 4: Configuration
3.For a newly added screen the LED: entry will show No LED. Click on the drop down handle and choose the LED indicator that you wish to associate with the currently selected video display screen. See Figure
Each entry within the LED: list relates to one of the ten output sockets on the ServSwitch Freedom LED Monitor module.
Note: It is possible to associate any LED indicator with more than one video screen.
Figure 4-7. Choosing an individual indicator port
4.Choose the ServSwitch Freedom LED Monitor output port that you wish to associate with the currently selected video screen.
5.Optionally alter the color, from the Color: list, that you wish the LED indicator to display when the associated video screen is selected. See Figure
Note: Each LED indicator can only have one color, so if you associate an indicator with more than one screen and then change the color on a later screen assignment, it will be changed for all the screens in the list for that LED indicator.
Figure
6.Click OK to save and exit.
7.Repeat steps 1 to 6 for each screen that requires an LED monitor indicator.
8.Choose Configure > Send Layout to Switch to update the ServSwitch Freedom switch.
9.IMPORTANT: Once the Glide and Switch configuration application has downloaded the setup, remove and recon- nect power to the ServSwitch Freedom to allow the new settings to take effect.
Page 29 |