Black Box KV1500A manual ScrlLock Scan Skip Ncsl

SERVSWITCH™ SUMMIT

Selection Menu
Summit 8x32	Page	1/8
No Ch.ID	Name	Scn
-- -------- ------------		---
1 01		03
2 02	NT40-Mail	03
3 03	Wins95_Bob	03
4 04	Wins98_Jack	03
5 05	Wins98_Jana	03
6 06	NT40-Fax	03
7 07	Wins95_Paul	03
8 08	Wins98_Sher	03

---------- ------------ ---

Page FKey Ent Esc

ScrlLock Scan Skip NCSL

Figure 4-4. The Selection Menu for a KV1502A (shown after

a hypothetical basic system configuration is finished).

4.Repeat steps 2 and 3 for each USM you want to connect to the Base Unit.

5.Connect a CIM and its computer CPU.

a.Connect the cable strands of an appropriate CIM to the desired ports on a computer CPU:

•KV1515A (IBM PS/2 compatible CPUs): Plug the HD15 strand into the CPU’s HD15 VGA video port. Plug the purple 6-pin mini-DIN keyboard strand into the CPU’s 6-pin mini-DIN keyboard port. Plug the light green 6-pin mini-DIN strand into the CPU’s 6-pin mini-DIN mouse port.

•KV1516A (Sun compatible CPUs): Plug the HD15 strand into the CPU’s HD15 VGA video port. Plug the 8-pin mini-DIN strand into the CPU’s 8-pin mini-DIN keyboard/mouse port.

•KV1517A (USB CPUs of any platform): Plug the HD15 strand into the CPU’s HD15 VGA video port. Plug the USB Type A strand into one of the CPU’s USB Type A ports.

•KV1518A (serial CPUs, routers, etc.): See Appendix G for installation instructions.

•KV1519A (local [single-user] IBM PS/2 compatible CPUs): See Appendix C for installation instructions.

24