APPENDIX C: Using a KV1519A to Access a Local CPU
Appendix C: Using a KV1519A to
Access a Local CPU
If you have a local PC CPU that you want only the user(s) at a certain user station to be able to access, but you want that user station to be able to access the CPUs attached to the ServSwitch Summit system as well, you can do this by inserting a KV1519A
Other
CPUs
CIMs
| Local | |
| PC | |
| KV1519A | |
| CIM | |
Base |
| |
Unit |
| |
USMs and user stations | USM and | |
user station | ||
with no access to the | ||
with access | ||
local CPU | ||
to the local | ||
| ||
| CPU |
Figure C-1. A Summit system that uses a KV1519A to support a local CPU.
To do this for a given user station, take these steps:
1.If you haven’t already done so, install your Summit system as described in Chapter 4.
2.Take the cable that connects the user station’s USM to the Base Unit and disconnect it from the Base Unit’s user port.
57