Black Box KV1500A manual ScrlLock Scan Skip Ncsl

CHAPTER 4: Installation and Initial Configuration

6.Configure the channels in your system. (Check the [Scroll Lock] LED on one of your user-station keyboards. If it’s blinking, the Summit is ready to accept hotkey commands from that user station. Hotkey commands can be used with the OSUI to login, select computers, or administer the system.)

a.At the Login Menu, type admin in the User Name field and press [Enter]. In the Password field, type the default password blackbox (all lowercase) and press [Enter].

b.The monitor should display the OSUI’s Selection Menu, indicating that the USM is correctly installed. After you’ve finished installing and configuring your cascaded system, this menu might resemble Figure 4-8.

Selection Menu
Main_16x64	Page	1/8
No Ch.ID	Name	Scn
-- -------- ------------		---
1 01		03
2 02	NT40-Mail	03
3 03	Wins95_Bob	03
4 04	Wins98_Jack	03
5 05	Matrls_8x32	--
6 06	NT40-Fax	03
7 07	Mrktng_8x32	--
8 08	PubSrv_8x32	--

---------- ------------ ---

Page FKey Ent Esc

ScrlLock Scan Skip NCSL

Figure 4-8. A Selection Menu (shown after a hypothetical cascaded system

configuration is finished).

c.Press [F5] to bring up the Administration Menu, shown in Figure 4-5 in Section 4.2. Use the up- and down-arrow keys to move the highlight to the Channel Configuration entry and press [Enter] to select it.

d.The Channel Configuration menu should appear. Use the up- and down- arrow keys and [PageUp] and [PageDown] keys to approach channels that subsidiary Base Units are connected to. These will be shown in white with their default device names in the Name column and their types in the Device column: “S242” for a 2 x 42 Base Unit (KV1500A), “S442” for a 4 x 42 Base Unit (KV1501A), “S832” for an 8 x 32 Base Unit (KV1502A), or “S1664” for a 16 x 64 Base Unit (KV1503A). After you’ve finished installing and configuring your cascaded system, this menu might resemble Figure 4-9.

29