![Primary Link Number](/images/new-backgrounds/106752/106752107x1.webp)
Applications
7
Now that the remote site profile is created, a link number must be assigned as the primary link number. The primary link number is the link interface that the router will use to attempt to establish a connection to the remote site PPP router.
Primary Link Number
Location: Main
ÄConfiguration
ÄWAN Set up
ÄRemote Site
ÄEdit Remote Site
ÄConnection
ÄPrimary Link
The Primary Link number defined here is the link interface used to establish the connection to the remote site PPP router. When a link number is defined within a new remote site profile, that link number will be removed from any remote site profile that originally was defined to use the link. The link will then be used within the newly defined remote site profile.
When this remote site profile is defined to use Multilink protocol, the Secondary Connection should also be defined.
The Bridge settings may now be configured within the Bridge Parameters menu.
The IP settings may now be configured within the IP Parameters menu.
The IPX settings may now be configured within the IPX Parameters menu.
The Compression settings may now be configured within the CCP Parameters menu.
The configuration options described here are only for initial
46