Continued from previous page

2

3

4

5

4]

 

 

 

 

 

 

 

1]

2]

 

 

 

 

 

 

 

 

 

 

 

 

 

3]

 

 

 

 

 

 

4]

 

 

5]

 

 

Syslog

 

 

Application Set-Up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SNMP Set-Up

 

 

 

 

 

DHCP Set-Up

 

 

 

 

Firewall Set-Up

NAT Exports

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Syslog

 

 

 

 

 

 

1. SNMP set-up menu

 

 

 

 

1. Edit Community menu

 

1. Server IP pool address menu

1. LAN firewall setup menu

1. Edit Services

 

 

 

 

 

 

 

 

 

 

 

2. Syslog IP

 

 

 

 

 

 

2. DHCP set-up menu

 

 

 

 

2. Message Size

 

2.DNS setup menu

 

 

 

 

2. WAN firewall setup menu

2. Router port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Events

 

 

 

 

 

 

3. Firewall set-up menu

 

 

 

 

3. Show Communities

 

3. NetBIOS setup menu

 

1,2]

 

 

3. Block src IP spoofing

3. Default export

 

 

 

 

 

 

4. NAT exports

 

 

 

 

4. Remove Community

 

4. DHCP services

 

 

 

 

LAN / WAN Firewall Set-Up

4. Show services

4. Security

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Activation

 

 

 

 

 

 

5. Syslog

 

 

 

 

1]

 

 

 

 

 

 

 

 

 

5. Relay destination

 

 

 

 

5. Clear services

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. ICMP echo verification

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Firewall

 

 

 

 

 

 

6. Time to live

 

 

 

 

 

Edit

Community

 

7. Lease period

 

 

 

 

 

1. Designated servers menu

1]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7. Traceroute

 

 

 

 

 

1. Write Access

 

8. Default Gateways

 

 

 

 

 

2. Edit firewall entry menu

 

 

 

Edit Services

 

 

 

 

 

 

 

 

8. Ping

 

 

 

 

 

 

1]

 

 

 

 

 

 

 

 

 

 

 

 

 

3.Firewall

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Show Addresses

 

 

 

 

Server IP address pool

 

4. Firewall statistics

 

 

1. Other Services menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Add Address

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Clear statistics

 

 

2. E-mail

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Remove Address

 

 

 

 

 

 

1. IP address pool

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Show firewall entries

 

 

3. POP 2/3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Show address pool

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. FTP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Add static address

 

 

 

 

7. Remove entry

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. WWW (HTTP)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Remove static address

 

1]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2]

 

 

 

Designated

Servers

 

 

6. Telnet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DNS Set-Up

 

 

 

 

 

 

 

 

 

 

7. DNS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. E-mail (SMTP) server

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Primary DNS

 

 

 

 

 

 

 

 

 

2. POP 2/3 server

 

 

 

Other Services

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. FTP server

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Secondary DNS

 

 

 

 

 

 

 

 

4. WWW (HTTP) server

 

1]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Domain name

 

 

 

 

 

 

 

 

5. Telnet server

 

 

 

1.NAT port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Local DNS

 

 

 

2. Status

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NetBIOS Setup

 

 

 

 

 

 

 

 

7. Remote DNS

 

 

 

3. Host IP address

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Host port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8. Secondary local DNS

 

 

 

 

 

5]

 

 

 

 

 

 

 

 

 

 

1]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Send NetBIOS node type

 

2]

 

 

9. Secondary remote DNS

 

 

 

5. Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Send NetBIOS scope

 

 

 

Edit Firewall

 

Entry

 

 

 

6. Remove

 

 

 

 

 

 

 

 

Bridging Set-Up

 

 

 

 

 

 

Spanning

Tree

 

 

 

 

 

 

3. Send NetBIOS name srv

 

 

 

 

 

 

2]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. NetBIOS node type

 

 

 

 

 

 

 

 

1. Dest IP address

 

 

 

Router

Port

 

 

 

 

 

 

 

 

1. Spanning Tree menu

 

 

 

 

 

 

1. STP State

 

 

 

 

 

 

5. NetBIOS scope Id

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Destination mask

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Bridge Forwarding

 

 

 

 

 

 

2. Bridge Priority

 

 

 

 

 

 

6. NetBIOS name server

 

 

 

 

 

 

 

1.Telnet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Source IP address

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Forwarding Delay

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. TFTP

 

 

 

 

 

 

 

 

3. Bridge Aging Timer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Source mask

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Message Age Timer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. SNMP

 

 

 

 

 

 

 

 

4. Show Bridging Table

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Protocol type

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Hello Time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Show Permanent Table

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Source port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Show Bridge

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Clear Bridging Table

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7. Destination port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7. Show Ports

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8. Description

 

 

 

 

 

 

 

 

 

 

 

IP Routing Set-Up

 

 

1]

 

 

 

 

 

 

 

 

 

 

 

2]

 

 

 

 

 

 

 

 

9. Entry direction

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IP

Routes

 

1]

 

 

 

 

 

 

 

 

ARP

Set-Up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. IP Routes menu

 

 

 

 

 

 

 

Edit

Static Route

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Edit Static Route

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. ARP aging timer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. ARP Set-up menu

 

 

 

 

 

 

2. Default Gateway

 

 

 

 

 

1. Destination

2. ARP retry timer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. IP routing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. IP forwarding

 

 

 

 

 

 

3. Show all Routes

 

 

 

 

 

2. Status

 

3. Add

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. ARP proxy

 

 

 

 

 

 

4. Show Static Routes

 

 

3. Remote site

4. Remove

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Clear Static Routes

 

 

2. Next hop

 

5. Show ARP table

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Type

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Cost

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Private

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Add/Remove

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IPX Routing Set-Up

 

 

 

1]

 

 

 

 

 

 

 

 

 

 

 

 

 

7. Network mask

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Static Routes

 

 

 

 

 

 

8. Status

 

2]

 

 

 

 

 

Static Services

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Static Routes menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Edit Route

 

 

 

 

 

 

 

 

 

Edit Route

 

 

 

 

1. Edit Service

 

 

 

 

Edit Service

 

 

 

 

 

 

 

 

2. Static Services menu

 

 

 

 

 

 

 

 

1]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. IPX Routing

 

 

 

 

 

 

2. Convert Route

 

 

 

 

1. Status

 

 

 

 

 

2. Convert Service

 

 

1. Status

 

 

 

 

 

 

 

 

4. IPX Forwarding

 

 

 

 

 

 

3. Show Static Routes

 

 

 

 

 

 

 

 

 

 

 

3. Show Static Services

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Clear Static Routes

 

 

 

 

 

 

2. Network

 

 

 

 

 

4. Clear Static Services

 

 

2. Server Name

 

 

 

 

 

 

 

 

5. Local Networks

 

 

 

 

 

 

 

 

 

 

 

 

3. Interface

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Service Type

 

 

 

 

 

 

 

 

6. Show Routes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Hops

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Interface

 

 

 

 

 

 

 

 

7. Show Services

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Ticks

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Network

 

 

 

 

 

 

 

 

8. Help

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Node

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7. Socket

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8. Hops

 

 

8]

 

 

Filter Set-Up

 

 

1]

 

MAC Address

 

 

 

 

2]

 

Bridge Pattern

 

3] IP Router Pattern

 

4] IPX Router Pattern

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Filters

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Filters

 

 

 

 

 

Filters

 

 

 

 

 

Filters

 

 

 

 

 

 

1. MAC Address Filters

 

 

 

 

1]

 

 

 

 

Edit MAC

1. Show Alias

 

 

 

 

1. Show Alias

 

 

 

1. Show Alias

 

 

 

 

 

 

 

 

 

 

 

 

1. Edit MAC Address Filter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Bridge Pattern Filters

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. IP Router Pattern Filters

2. Filter Operation

 

Address Filter

2. Add Alias

 

 

 

 

 

2. Add Alias

 

 

 

2. Add Alias

 

 

 

 

 

 

 

 

4. IPX Router Pattern Filters

3. Broadcast Address

 

 

1. Status

3. Remove Alias

 

 

 

 

3. Remove Alias

 

 

 

3. Remove Alias

 

 

 

 

 

 

4. Show Bridging Table

 

 

4. Show Pattern

 

 

 

 

4. Show Pattern

 

 

 

4. Show Pattern

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Show Permanent Table

 

 

2. Location

5. Add Pattern

 

 

 

 

5. Add Pattern

 

 

 

5. Add Pattern

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Clear Bridging Table

 

 

3. Filter If Source

6. Remove Pattern

 

6. Remove Pattern

 

 

 

6. Remove Pattern

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Filter If Destination

7. Help

 

 

 

 

 

7. Help

 

 

 

7. Help

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Permanent

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Remove

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Statistics

 

 

1]

 

Statistics Set-Up

2]

 

 

 

 

Remote

Site

 

3]

 

 

LAN

Statistics

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Statistics set-up menu

 

 

 

 

1. Extended Statistics

 

 

 

 

Information

 

 

 

 

 

1. Bridged traffic

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Remote site information

menu

2. Interval

 

 

 

 

1.Common protocol stats

 

2. IP traffic

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. LAN statistics menu

 

 

 

 

3. Clear All Statistics

 

 

 

 

2. PPP statistics

 

 

 

 

 

3. IPX traffic

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Link stats

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Frame relay statistics

 

 

 

 

4. Total LAN traffic

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Link summary

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Status

 

 

 

 

 

5. LAN error

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Interface stats

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Usage information

 

 

 

 

6. Clear LAN statistics

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7. Interface status

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Clear remote site stats

 

7. Clear LAN errors

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8. Clear link & interface stats

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Diagnostics

 

 

 

 

 

4]

 

WAN

Trace

 

 

 

 

5]

 

 

 

 

 

 

 

 

 

 

 

 

2]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WAN Loopback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Test Pattern Set-Up

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Soft Reset

 

 

 

 

 

 

1. Trace link

 

 

 

 

 

 

 

 

1. Link operation

 

 

 

 

 

1. Pattern

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Full Reset

 

 

 

 

 

 

2. Real Time

 

 

 

 

 

 

 

 

2. Data test

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Start Xmt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Heartbeat

 

 

 

 

 

 

3. Capture

 

 

 

 

 

 

 

 

2. Test pattern set-up menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. WAN trace

 

 

 

 

 

 

4. End

 

 

 

 

 

 

 

 

3. T1/E1 loopback menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. WAN loopback

 

 

 

 

 

 

5. Data display

 

 

 

 

 

 

 

 

3. CSU/DSU self test

 

 

 

 

 

T1/E1 Loopback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Time

 

 

 

 

 

 

 

 

4. CSU/DSU digital loopback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. CSU/DSU remote loopback

 

1. Loopback type

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Network Events

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Help

 

 

 

 

 

 

 

 

 

2. Loopback node

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Loopback delay

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Start/Stop loopback

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Acknowledge alarm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Show events

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Clear events

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Show security log

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Clear security log

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Show resumption log

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu Tree

 

 

 

 

 

 

 

7. Clear resumption log

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Logout

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

software release: 51V.06.02.xx

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

software release: 52V.06.02.xx

 

 

6Help

Page 73
Image 73
Black Box LR5200A-R2, LR5100A-T manual Menu Tree

LR5200A-R2, LR5100A-T specifications

The Black Box LR5100A-T and LR5200A-R2 are advanced network media converters designed to facilitate seamless data transmission across various media types. These devices are particularly valuable for organizations seeking high-performance solutions for extending network communications beyond traditional limits.

The LR5100A-T is an Ethernet media converter that operates over twisted pair cabling, efficiently converting 10/100/1000 Mbps Ethernet signals into fiber optic signals. This capability allows businesses to harness the long-distance advantages of fiber optics while maintaining compatibility with existing Ethernet infrastructure. With a broad range of supported distances, users can effectively communicate over distances up to 100 kilometers, depending on the type of fiber optic cable used and the transmission rate.

In contrast, the LR5200A-R2 emphasizes compatibility with a wider range of fiber types and supports both multimode and single-mode fiber connections. It also provides auto-negotiation capabilities, which enable it to automatically detect and configure to the optimal speed of connected devices, streamlining setup and enhancing user experience.

One of the key features of both the LR5100A-T and LR5200A-R2 is their rugged design, making them suitable for deployment in harsh environments. They are engineered to withstand extreme temperatures and are resistant to vibration, ensuring reliability in challenging settings. Additionally, both models adhere to industry standards, ensuring interoperability with a diverse array of networking equipment.

Notably, these converters come equipped with LED indicators that allow for real-time monitoring of device status, simplifying network management and troubleshooting. This feature ensures that technicians are promptly alerted to any connectivity issues, significantly reducing downtime.

Powering options for both models include standard AC power supplies or Power over Ethernet (PoE), allowing for flexible deployment scenarios without the need for additional power outlets. This flexibility can be a crucial factor in environments where power availability may be limited.

With their blend of performance, durability, and advanced features, the Black Box LR5100A-T and LR5200A-R2 media converters represent a solid choice for organizations looking to future-proof their network infrastructure while ensuring high levels of connectivity and reliability. Whether extending existing networks or implementing new solutions, these devices provide the necessary tools for effective communication in today’s digital world.